Archive for the ‘Time Change’ Category

How to Change Time on a Toshiba Phone System

Friday, July 22nd, 2011
Toshiba Strata DK Telephone System
Changing the time on a Strata DK system must be done from the “main” or primary phone. It is usually extension # 10, or # 200.
1.- With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply)
2.- Enter the correct time using HH/MM/SS, like 07:24:00
3.- Press redial
TOSHIBA 16
Leave the handset on hook, press intercom 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds – enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 – usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom 6 5 2, 1 4 1 5 0 0, Redial Speaker. .
TOSHIBA 16E / 40
Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds – enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 – usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker.
TOSHIBA 280 / 424
Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds – enter a leading 0 for any single digit entered, press Redial, press Speaker.
This must be done at extension 200 – usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker.
TOSHIBA CTX 100
Do Not Pick Up Handset (Must be done at display phone)
– Press Hold Button * # * # 1 * 2 * 3 *
– Display says Password =
– Enter 0 0 0 0
– Press HOLD Button
– Display says Prog =
– Enter 9 0 2
– Press HOLD
– Display says Select Param
To change Date:
– Press Intercom Button
– Enter Date: YY MM DD (YY=02, MM=10, DD=28)
– Press HOLD Button
– Press HOLD
– Lift Handset and return to cradle
To change Time:
– Press Line 1 button (button directly above intercom button)
– Enter Time: HH MM SS (HH=22 MM=03 SS=00) – military time must be used
– Press HOLD
– Press HOLD
– Lift handset and return to cradle
Toshiba DK280
Date
From receptionist station, without lifting the handset, press “Intercom”
Dial “#651”
Dial the time in YY:MM:DD format.
Press “Redial” or “#”.
Press speaker.
Time
From receptionist station, without lifting the handset, press “Intercom”
Dial “#652”
Dial the time in military format HH:MM:SS.
Press “Redial” or “#”.
Press speaker.
Day of the Week
From receptionist station, without lifting the handset, press “Intercom”
Dial “#653”
Dial the day of the week (1-7).
Press “Redial” or “#”.
Press speaker.
Toshiba Perception System – from attendant station
Follow all steps even if you wish to change only the time on your system.
Display Date:
Press the “DIS TOD” key.
The date is now displayed as follows:
SRC     cos DEST
Month Day Year
Set Date:
Enter the date on the dial pad in MMDDYY format. The new date is displayed.
Display Time:
Press the “DIS TOD” key again.
The time is now displayed as follows:
SRC       cos       DEST
Hours Minutes Seconds
Set Time:
Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
To Start the Clock and Clear Display:
Press the “DIS TOD” key a third time.

Changing the time on a Norstar Phone System

Saturday, May 29th, 2010

How to change the time on their Norstar Phone System.  The instructions are very easy and written below.

The programming needs to be done from a Norstar T7316E, Norstar M7310 or Norstar M7324.  If you require any of these phones Comtechphones.com has them all in stock.

To get into programming please do the following:

  1. Locate the  Feature Button (or Button with the Nortel Logo)
  2. Press Feature **266344 (The Star button is under the 7)
  3. The display will ask for a password.  Enter 23456
  4. You will see Terminals and Sets and two button on the right side of the phone will have lit up.  A button on the left will also have lit up.
  5. The top button on the right that has lit up is going to be labelled as SHOW.
  6. The second button on the right that has lit up is going to be labelled NEXT.
  7. When you see
  8. Press Next 5 times. (Top right button 5 times)
  9. Press SHOW. (Second right button once)
  10. When you see “Hour”, press “Change” on the display
  11. Type in the hour using military time as a 2 digit number.
  12. Press “NEXT”.
  13. When you see “Minutes”, press “Change”
  14. Type in the minutes using a 2 digit number.

That should allow you to change the Time on your Norstar Phone System.

Changing the Time on Avaya Partner Phone Systems

Wednesday, May 19th, 2010

Every time Daylight Savings starts or ends we get a lot of people asking us how to change the time on their Partner Phone Systems.  The instructions are very easy and written below.

On the Partner System all programming has to be done from Extension # 10. This is usually the receptionist extension.  Please check the display to make sure that the extension states 10.  If you require a display phone such as the Avaya Partner 18 Display they can be purchased over here.

  1. With the handset on the cradle do the following.
  2. Press the FEATURE button
  3. Enter 00 (Zero, Zero) to get into programming
  4. Press the left intercom key twice. (2 times)
  5. Enter #103 (The # key is located under the 9 key)
  6. Enter the time in a 24 hour format.  HHMM where HH is hours and MM is minutes. (Example 1025 would be 10:25 AM)
  7. Press the FEATURE button
  8. Enter 00 (zero,zero)

The new time will show on your phone system.

If you need any Partner equipment Comtech has them all in stock.